What We Can Order, and Why Nothing Sits on a Shelf
This shop stocks fitting samples, not inventory. Everything that goes into a finished club is ordered after your session, which means no component ever gets recommended because it has been gathering dust since March.
Samples on the Wall, Parts on Order
Behind bench one there is a rack of roughly ninety fitting shafts with adapters fitted, a drawer of grips in every common size and texture, and a set of test heads across the major lines. That is what you hit during a session. None of it is for sale.
When the session produces an answer, the actual part is ordered from the supplier. It arrives in three to ten days depending on the line, gets measured on arrival, and goes onto the bench. The part number of the item you tested and the part number of the item installed are both printed on your docket, and they match.
Wood and Iron Shaft Lines
| Maker | Mostly used for | Samples held |
|---|---|---|
| True Temper | Steel iron and wedge shafts | Yes, full weight range |
| KBS | Steel irons, wedge specific profiles | Yes |
| Nippon | Lighter steel, softer stepping | Yes |
| Project X | Steel irons, firmer tip sections | Yes |
| Fujikura | Wood shafts across weight classes | Yes, adapter fitted |
| Mitsubishi | Wood shafts, lower torque options | Yes, adapter fitted |
| Graphite Design | Wood shafts, heavier profiles | Selected weights |
| UST Mamiya | Wood and graphite iron shafts | Selected weights |
| Aldila | Wood shafts, value tier | Selected weights |
| Accra | Graphite iron shafts for slower speeds | By request |
Rubber, Cord and Everything Between
Grip choice is where the Fort Worth summer earns a mention. A soft rubber compound that feels wonderful in April turns slick and greasy by the middle of July, and the golfers who complain about losing the club at the top are frequently reacting to that rather than to anything in the swing.
We keep samples in undersize, standard, midsize and jumbo, and we size against your hand and your glove rather than against a chart on the wall.
- Golf Pride, full range including cord and hybrid compounds
- Lamkin, rubber and cord
- Winn, softer wraps for arthritic hands
- SuperStroke, putter grips in several profiles
- Iomic and Pure, by request
Ordered to Your Specification
We are an authorised assembler for the major lines, which means heads are ordered as components and built here to your docket rather than pulled off a rack in stock trim. Custom lofts, lie bends and non-standard lengths carry no surcharge from us.
Where a manufacturer restricts component sales, we will say so during the session instead of quietly steering you elsewhere.
- Woods and irons: Titleist, Ping, Callaway, TaylorMade, Mizuno, Srixon, Cobra
- Wedges: Vokey, Cleveland, Callaway, Mizuno, Ping
- Putters: Odyssey, Scotty Cameron, Bettinardi, Ping, Evnroll
- Component-only makers: Wishon, Sub 70, Maltby
Ferrules, Adapters and Adhesive
Nobody advertises these and they are where a surprising share of build quality lives. We stock ferrules in every common bore, turned to the hosel rather than sanded flush, and we keep adapter sleeves for each manufacturer system so a shaft can be moved between heads without butchering it.
The epoxy is a twenty-four hour structural adhesive mixed by weight rather than by eye, with the batch date recorded on the docket. Fast-set adhesive has its uses, and a golf club hosel is not one of them.
Bring a Part, or Let Us Order It
Either way it gets measured on arrival and printed on your docket.